Installation manual

© 2007 • All rights reserved. 39
DHTP1 Amplifi ed Touch Pad Controller
Symptom Cause Solution
Source(s) not play-
ing audio
Verify that source(s)
turned ON, playing audio,
etc. Check Tape Monitor
settings on A/V or Stereo
Receiver.
Zone is in MUTE Check MUTE Indicator
LED on DHTP1.
Multi-channel digi-
tal audio formats
(5.1, 7.1 etc.) are
not supported by
the DHTP1, DHSIP,
DH44, etc.
Change Audio Source-
Digital Output to PCM
Stereo
Distorted
audio
Source Input Gain
too high on DH44 or
DHSIP
Reduce GAIN DIP switch
settings on DH44 or
DHSIP
Defective/Incom-
patible speaker
Check for damaged
speaker.