Installation manual

30 ©2007 • All rights reserved.
DHTP1 Amplifi ed Touch Pad Controller
Balance - The Volume Indicator Bar
4
indicates Balance Settings. The middle posi-
tion is center (equal balance) and is the factory
Default position. Use the Volume Up/Down but-
tons
5
to adjust Balance.
DRC On/Off - The Volume Bar
4
indicates
Dynamic Range Compression On/Off status.
The far left position indicates that DRC is Off
(Factory Default). The far right position indicates
that DRC is On. Use the Volume Up/Down
buttons
5
to select between DRC On/Off.
Loudness On/Off - The Volume Bar
4
indi-
cates Loudness On/Off status. The far left
position indicates that Loudness is Off (Factory
Default). The far right position indicates that
Loudness is On. Use the Volume Up/Down
buttons
5
to select between Loudness On/Off.
Press the indicated area
1
for to save settings
and exit Tone Control mode.
5.
6.
7.