Installation manual

© 2007 • All rights reserved. 29
DHTP1 Amplifi ed Touch Pad Controller
Tone Control Mode
Tone Control Mode allows for adjustment of audio
Tone settings including Bass, Treble Balance, Dynam-
ic Range Compression and Loudness. See Figure 4.5
on Page 29 for details.
To adjust Tone Control settings:
Press and hold the area indicated
1
for 3 sec-
onds to enter Tone Control Mode. The Source 1
LED will blink rapidly.
Each Source Number
2
represents a Tone
Control setting.
Source Number Tone Control Setting
1 Bass Adjustment
2 Treble Adjustment
3 Balance
4 Dynamic Range Compression
L Loudness On/Off
Use the Source Left/Right Button
3
to select
between the Sources 1-L for the desired
Tone Control setting.
Bass/Treble - The Volume Indicator Bar
4
indicates Bass/Treble Settings. The middle posi-
tion is flat (no boost or cut) and is the factory
Default position. Use the Volume Up/Down but-
tons
5
to adjust Bass/Treble.
1.
2.
3.
4.