Installation manual

© 2007 • All rights reserved. 21
DHTP1 Amplifi ed Touch Pad Controller
Page/Doorbell Volume Level
This setting determines the Page/Doorbell Volume
Level for the zone in which the DHTP1 is installed.
See Figure 4.2.
To adjust the Page/Doorbell Level:
Press and hold the PROGRAM button
1
then press “VOL ▼” at the area indicated
2
The Volume Bar
3
will display the existing
Page/DB volume level. At this point the DH44
will switch to the Page/DB audio input.
Activate the page or doorbell audio from the
connected communications controller.
Press VOL UP or DOWN
4
to adjust the Page/
Doorbell Volume Level accordingly in each zone.
Once the Page/Doorbell level has been set,
press the PROGRAM Button again
1
. Settings
will be saved and the Touch Pad will exit
Setup Mode.
1.
2.
3.
4.