Installation manual

© 2007 • All rights reserved. 19
DHTP1 Amplifi ed Touch Pad Controller
Whole House Music
Do Not Disturb
Display Timeout Length
This setting determines the amount of time that the
touch surface backlight and LED display area re-
mains ON after the last button press. Factory Default
is 30 seconds. See Figure 4.1.
To adjust the Display Timeout Length:
Press and hold the PROGRAM
1
button while
pressing and holding the area indicated
2
. The
Source 1 LED will blink rapidly.
Each Source Number
3
represents a Display
Timeout Length.
Source Number Display Timeout Length
1 30 Seconds (Factory Default)
2 1 Minutes
3 2 Minutes
4 3 Minutes
L No Time Out
Use the Source Left/Right Button
4
to Select
between the numbers 1-L for the desired Display
Timeout Length.
Once the Display Timeout Length has been set,
•
•
1.
2.
3.
4.