Installation manual

© 2007 • All rights reserved. 15
DHTP1 Amplifi ed Touch Pad Controller
DHSIP Connections
Interconnecting between the DHTP1 and the DHSIP
Source Input Wall Plate consists of plugging in a
Cat-5 cable terminated to an RJ-45 connector wired
to T-568A standard (see Figure 2.2) to the RJ-45 jack
on the rear of the DHSIP. The other end simply plugs
into the LOCAL PORT RJ-45 jack on the rear of the
zone’s DHTP1 Amplifi ed Touch Pad. See Figure 3.4
for details.
DHTP1 Rear
DH
S
IP
Side View
Cat-5
L+
L-
R+
R-
SPEAKERS
PWR IN
+
-
Figure 3.4: DHTP1 to DHSIP Connections