User manual

96
Configuring the system settings
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / settings.fm / 20.05.2010
Version 4, 16.09.2005
Ñ Delete the previous name/
number.
~ Enter the new MSN name/
number, if required.
¤ Repeat this process for other MSNs, if
required.
¤ Press the display key §Save§ to save the
changes.
If you have deleted both the MSN name and
number and not entered any new values, the
MSN is deleted.
If the MSN you have deleted was the send
connection (page 79) of an internal party
then a new send connection (the MSN with
the lowest ranked number) will automati-
cally be assigned to this internal party.
Assigning send and receive
connections to internal
parties
If you have several MSNs configured for your
telephone system, you can do the following
for each internal party:
u Assign a send connection or allow the
internal party to select the line for each
external call (select line).
u Assign one or several receive connec-
tions. Only calls received via the assigned
MSN(s) are signalled on the device.
Assigning a receive connection
Prerequisite: Several phone numbers are
configured for your desktop phone.
v
¢
Ï
¢ Telephony
¢ Send Connections
A list of the internal parties (desktop phone,
handsets, fax machine INT8 – where con-
nected) is displayed.
q Select the internal parties that
should be assigned a new send
connection and press the dis-
play key
§OK§.
r Select at each call or select an
MSN as the send connection.
§Save Press the display key to save the
changes.
If you select Select at each call, the internal
party can select which MSN is used to estab-
lish a connection every time he makes a call.
Assigning receive connections
Prerequisite: Several connections are con-
figured for your desktop phone.
v
¢
Ï
¢ Telephony
¢ Receive Connections
A list of the internal parties (desktop phone,
handsets, local answering machines, fax
machine INT8 – where connected) is dis-
played.
q Select the internal parties that
should be assigned new receive
connections and press the dis-
play key
§OK§.
A list containing all receive connections
(MSN) is opened.
r Select Ye s or No.
s Change to the next receive con-
nection.
¤ Repeat these two steps for each MSN.
¤ Press the display key §Save§ to save the
changes.
Updating the phone
firmware
Prerequisite: The desktop phone is con-
nected to the Internet (i.e., connected to a
router,
¢ page 14).
If necessary, you can update your desktop
phone's firmware.
The firmware update is downloaded directly
from the Internet by default. The relevant
Web page is preconfigured to your desktop
phone.