User manual

93
Configuring the system settings
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / settings.fm / 20.05.2010
Version 4, 16.09.2005
Configuring the system
settings
You can make the following settings via
the menu on the desktop phone, on a regis-
tered Gigaset SL78H, SL400H handset,
MT Aton CLx315 handset or via the Web
configurator on the desktop phone.
The following steps are carried out using the
desktop phone.
The majority of the settings can also be
made via a registered Gigaset SL78H,
SL400H or S79H handset. The procedure is
similar to that on the desktop phone,
although the menu structure is slightly dif-
ferent.
Instructions on operating via the desktop
phone's Web configurator can be found in
the user guide on the enclosed CD.
Setting the date and time
manually
To ensure you have the correct time for
incoming calls and to use the alarm clock
and calendar, the date and time must be set.
If the date and time on the desktop phone
have not yet been set, the
§Time§ display key
will appear.
§Time§ Press the display key.
Or:
v ¢
Ï
Settings
¢ Date/Time
¤ You can enter data in the following fields:
Date:
Enter day, month and year as an
8-digit number via the keypad
e.g., 4Q2QQ
for 14/01/2010.
Time:
Enter the hours and minutes as four digit
numbers via the keypad e.g., QM
5 for 07:15 am.
¤ Press the display key §Save§ to save the set-
tings.
Protecting against
unauthorised access
Protect the desktop phone system settings
with a PIN known only to you. You have to
enter the system PIN if you register or de-
register a handset, change local network set-
tings, perform a firmware update or reset the
phone to default settings.
Changing the system PIN
You can change the desktop phone's 4-digit
system PIN (default setting: 0000) to a 4-digit
PIN known only by you.
Setting a system PIN facilitates remote oper-
ation of the answering machine
(
¢ page 72).
v ¢
Ï
Settings
¢ System
¢ System PIN
~ Enter the current system PIN if
necessary and press
§OK§.
~ Enter new system PIN.
§Save§ Press the display key.
Please note
The address of a time server on the Internet
is stored on your desktop phone. The date
and time are taken from this time server
provided that the desktop phone is con-
nected to the Internet and synchronisation
with the time server is activated. Manual
settings are overwritten in this case.
The date and time are updated with each
outgoing external call.