User manual

89
Setting the desktop phone
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / settings.fm / 20.05.2010
Version 4, 16.09.2005
Selection:
Select screensaver with r Or
§View§ Press the display key. The active
screensaver is displayed.
s Select screensaver and
press
§OK§.
§Save§ Press the display key.
The screensaver is activated approx. 10 sec-
onds after the display has changed to idle
status.
If the screensaver conceals the display,
briefly press end key T to show the idle
display.
Setting the brightness and time
control for the display backlight
You can set the brightness of the display on
your desktop phone and specify a timeframe
during which the display is completely deac-
tivated e.g., at night.
If the display backlight is deactivated, it can
be reactivated by pressing any key or by an
incoming call. The display backlight is deac-
tivated again after approx. 30 seconds after
the last press of a key.
v
¢
Ï
¢ Display ¢ Backlight
The current setting is displayed.
¤ You can enter data in the following fields:
Time Control
Prerequisite: The date and time have
already been set.
Select On or Off.
The following fields are displayed when
Time Control = On.
Display off from:
Enter the time in 4-digit format when the
backlight should be deactivated in idle
mode.
Display off until:
Enter the time in 4-digit format when the
backlight should be reactivated.
Brightness:
Set the brightness of the display back-
light with r.
You can select from five brightness levels
(1 = low – 5 = very bright; e.g., brightness
level 3 = Š).
¤ Press the display key §Save§.
Changing the handsfree/
earpiece volume
You can set the volume for handsfree mode
and earpiece mode to five different levels.
Setting the volume in idle status
v ¢
Ï
¢ Audio Settings
¢ Call Volume
You will hear a test tone.
r Set the earpiece volume.
s Scroll to the Speaker line.
r Set the handsfree volume.
§Save§ Press the display key to save
the setting.
Setting the volume during a call
You can adjust the volume during a call
using the R and S keys. Each time
you press the key, the volume will increase or
decrease by one level.
§Save§ Press the display key if neces-
sary to save the setting perma-
nently.
Setting ringers
Setting the volume
You can choose between five volumes (1–5;
e.g., volume 3 = Š) and the "crescendo"
ringer (6; volume increases with each ring =
‡).
You can set different volumes for the follow-
ing functions:
u Internal calls and appointments
(Appointments
¢ page 76)