User manual

83
Connecting/using other devices
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / HS_and_other_Devices.fm / 20.05.2010
Version 4, 16.09.2005
Using Bluetooth devices
Your desktop phone can communicate wire-
lessly via Bluetooth™ with other devices
using this technology.
Use Bluetooth to do the following on the
desktop phone:
u Register a Bluetooth headset
u Register up to 5 data devices (PC, PDA),
with which you can swap directory
entries in the form of vCards
u Load ringer melodies and images from
the PC to the desktop phone with the
help of the QuickSync software
(page 106).
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the desktop phone.
To use the phone numbers, dialling codes
(country and area code) must be stored on
the desktop phone (page 94).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Activating/deactivating Bluetooth
mode
v ¢ ò Bluetooth
Activation Select and press §Change§ to acti-
vate or deactivate Bluetooth
mode (³ = activated).
When the desktop phone is in idle status, the
ò icon in the header indicates that Bluetooth
mode is activated (page 3).
As soon as Bluetooth is activated, your desk-
top phone is visible to all Bluetooth devices
in the receiving range and can communicate
with all of the devices included in the Known
Devices list.
In Bluetooth mode, incoming calls are
ignored.
Registering Bluetooth devices
The distance between the desktop phone in
Bluetooth mode and the activated Blue-
tooth device (headset or data device) should
be no more than 10 m.
Please note
u You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile is used
to communicate.
u It can take up to five seconds to estab-
lish a connection between your desk-
top phone and a Bluetooth headset.
This applies both when a call is
accepted using the headset or trans-
ferred to the headset, and when a
number is dialled from the headset.
u The A2DP standard (Advanced Audio
Distribution Profile) is not supported.
Please note
u If you register a headset, any headset
that is already registered is overwrit-
ten.
u If you would like to use a headset
already registered to another device
(e.g., to a mobile phone) with your
desktop phone, please deactivate
this connection before you start the
registration process.