User manual

58
Sending SMS (text messages)
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / sms_BRD_neutral.fm / 20.05.2010
Version 4, 16.09.2005
Sending SMS messages to an
e-mail address
*
If your service provider supports the SMS as
e-mail feature, you can also send your SMS
messages to e-mail addresses.
The e-mail address must be at the beginning
of the text. You must send the SMS to your
SMS service centre's e-mail service.
v
¢
Ë
SMS ¢ New SMS
s / ~ Transfer the e-mail address from
the directory or enter it manu-
ally. End the entry with a space
or colon (depending on the
service provider).
~ Enter the SMS text.
§Options§ Press the display key.
Send Select and press §OK§.
E-mail Select and press §OK§. If the
number of the e-mail service is
not entered (page 60), enter
the number of the e-mail serv-
ice.
§Send§ Press the display key.
Sending SMS messages as a fax
*
You can also send an SMS to a fax machine.
Prerequisite: Your network provider sup-
ports this feature.
¤ You are writing an SMS (page 56).
§Options§ Press the display key.
Send Select and press §OK§.
Fax Select and press §OK§.
s / ~ Select number from the direc-
tory or enter it manually. Enter
the number with area code
(even if you are in the same
area).
§Send§ Press the display key.
Receiving an SMS
All received SMS messages are saved in the
incoming list. Linked SMS messages are dis-
played as one message. If this is too long or
is not transferred completely, it is split into
individual messages. Since an SMS remains
in the list even after it has been read, regu-
larly delete SMS messages from the list.
The display tells you if the SMS memory is
full.
Incoming list
The incoming message list contains:
u All received SMS messages regardless of
the MSN it was intended for. All received
SMS messages are displayed on all hand-
sets and on the desktop phone. The most
recent SMS appears at the top of the list.
u SMS messages that could not be sent due
to an error.
New SMS messages are indicated by the
Ë
icon in the display, the f message key
flashing and an advisory tone sounding.
Opening the incoming list with the
f key
f Press.
The incoming list displays the number of
entries (example):
Bold: New entries
Normal font: Old entries
¤ Open list with §OK§.
* Dependent on the provider; currently not sup-
ported on the Swisscom network.
Please note
You can only delete SMS messages that
have been sent to a receive connection
(MSN) assigned to your device (desktop
phone or handset). If the memory is
taken up by SMS messages that have
been sent to other MSNs, a notification
to this effect will appear on the display.
SMS: (2)