User manual
55
Making cost-effective calls
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / charges.fm / 19.05.2010
Version 4, 16.09.2005
Making cost-effective
calls
After making a call, you can view the costs.
Displaying call duration/
charges
The charges or the duration of a call always
appear on the display during an external
call:
u During the conversation
u Until approximately 3 seconds after
replacing the receiver.
If the metering pulse is transmitted, the
call duration is displayed instead of the
call charges during an outgoing,
external call.
The charges are automatically transmitted
when using the Swisscom ISDN network.
The factor is CHF 0.10. You only receive infor-
mation for the current call. It is not possible
to check total charges (accumulated costs).
Please note
The actual charges or the duration of the
call can vary from that shown by a few
seconds..