User manual

9
Taking the first steps
Gigaset DX600A isdn / Swisscom EN / A31008-N3101-F151-1-7619 / starting.fm / 20.05.2010
Version 4, 16.09.2005
Installing the desktop phone
The desktop phone is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
¤ Set up the desktop phone at a central point in the building.
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Firmware updates
This user guide describes the functions of your desktop phone from firmware
version 30.00.
Whenever there are new or improved functions for your Aton, firmware updates
are made available for you to download to your desktop phone (
¢ page 96).
If this results in operational changes to your desktop phone, a new version of
this user guide or the necessary amendments are published on the Internet at
www.swisscom.ch
.
Select the product to open the relevant product page for your desktop phone
where you will find a link to the user guide.
To find out what version of firmware is currently loaded (
¢ page 104).
Please note
If you wish to operate handsets from your desktop phone, consider the range of
the desktop phone. This is up to 250 m in unobstructed outdoor areas and up
to 40 m inside buildings. The range is reduced when eco mode is activated
(
¢ page 75).
Warning
u Never expose the telephone to any of the following: Heat sources, direct sun-
light or other electrical appliances.
u Protect your Aton from moisture, dust, corrosive liquids and fumes.