User guide

45
Using several handsets
Aton CLT109 / Swisscom EN / A31008-M2007-F151-1-2X19 / registr_sett.fm / 04.02.2009
Version 4, 29.10.2007
Using several handsets
Registering handsets
You can register up to four handsets on
your base station.
For how to register your handset automat-
ically,
¢ page 13.
If automatic registration does not work,
you will have to register the handset man-
ually.
Manual registration to Aton CL110/
CLT110
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number is shown in the display, e.g.
INT 1. If it does not appear, repeat the pro-
cedure.
On the handset
§Menu§ ¢ Settings ¢ Handset
¢ Register Handset
~ Enter the system PIN of the
base station (the default is
0000) and press
§OK§. Handset is
registering flashes on the dis-
play.
On the base station
Within 60 sec., press and hold the regis-
tration/paging key on the base station
(
¢ page 2) (approx. 3 sec.).
Registering other handsets
You can register other handsets and hand-
sets for other devices with GAP functional-
ity as follows.
On the handset
¤ Start to register the handset as
described in its user guide.
On the base station
Press and hold the registration/paging key
on the base station (
¢ page 2) (approx.
3 sec.).
De-registering handsets
Handsets can only be de-registered by
resetting the base station to its default set-
tings. This will also reset every other
setting
¢ page 50.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤ Briefly press the registration/paging
key on the base station (
¢ page 2).
¤ All handsets will ring simultaneously
("paging"), even if the ringer tones are
deactivated.
Ending paging
¤ Briefly press the registration/paging
key on the base station or press the talk
key c on the handset.
Please note
Each additional handset must be regis-
tered on the base station in order for it
to work properly!
Note
When registering handsets that are not
compatible with Eco Mode plus, Eco
Mode plus is deactivated and will not
work.