User guide

39
Operating the answer machine of the Aton CLT110 base station
Aton CLT109 / Swisscom EN / A31008-M2007-F151-1-2X19 / answering_m.fm / 04.02.2009
Version 4, 29.10.2007
Activating/deactivating call
screening
During recording of a message you can
screen calls via the loudspeaker of the
base station and registered handsets.
Permanently activating/deactivating
call screening
§Menu§ ¢ Voice Mail ¢ Call Screening
¢ Handset / Base (‰ =on)
a Press and hold (idle status).
Call screening can be simultaneously acti-
vated on the base station and handset.
Deactivating call screening for the
current recording
a Press the end call key.
Setting up the answer machine
The answer machine has already been
preset at the factory. Make individual set-
tings using the handset.
Setting call acceptance
You can set when you want the answer
machine to answer a call.
The options are: Immediately, 10 sec, 18 sec
or 30 sec and Auto.
In Auto mode, the following applies for call
acceptance:
u If there are no new messages, the
answer machine answers a call after
18 seconds.
u If new messages are present, the
answer machine accepts a call after just
10 seconds.
§Menu§ ¢ Voice Mail ¢ Ring Delay
q Select an option Immediately /
10 sec / 18 sec / 30 sec / Auto and
press
§OK§ (‰ =on).
a Press and hold (idle status).
Setting the recording time
You can set the maximum recording time
of a message.
§Menu§ ¢ Voice Mail ¢ Message Length
q Select a recording time and
press
§OK§ (‰ =on).
a Press and hold (idle status).
Changing the language for voice
prompt and pre-recorded
announcement
§Menu§ ¢ M4O2
~ Enter digit for the required lan-
guage (Q =German,
 = French, 2 =Italian,
3 = English) and press
§OK§.
Resetting fast access for the
answer machine using key 1
The integrated answer machine has
already been preset for fast access at the
factory. However, if you have set the net-
work mailbox for fast access (
¢ page 41),
you can reset this setting.
§Menu§ ¢ Voice Mail ¢ Set Key 1
Answer Machine
Select and press
§OK§.
a Press and hold (idle status).
When you have selected the answer
machine, press and hold key 1. You will be
connected directly.
The setting for fast access applies to all
registered handsets.
Note
The options are: 1 Minute, 2 Minutes,
3 Minutes or Unlimited.