User manual

53
Base station settings
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / registr_sett.fm / 17.06.2010
Version 4, 16.09.2005
Protecting against
unauthorised access
Protect the system settings of the base
station with a PIN known only to yourself.
The system PIN must be entered when,
for example, registering/de-registering a
handset to/from the base or when restoring
the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Aton CLT112: Setting a system PIN enables
remote operation of the answering machine
(¢ page 43).
§Menu§ ¤ Settings ¤ System ¤ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter your new system PIN and
press
§OK§.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Resetting the base to the
default settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco Mode+
is deactivated
u The system PIN is not reset
§Menu§ ¤ Settings ¤ System ¤ Base Reset
§Yes§ Press the display key.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
Please note
The answering machine is ready for use
approx. 15 seconds after the base has
been connected or reset.