User manual

52
Base station settings
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / registr_sett.fm / 17.06.2010
Version 4, 16.09.2005
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u Registration of the handset to the base
u Date & time
u Entries in the directory, call lists, SMS lists
§Menu§ ¤ Settings ¤ System ¤ Reset Handset
§OK§ Confirm prompt.
Base station settings
The base settings are carried out using a reg-
istered handset.
Changing ringtones
u Volume:
You can choose between five volumes
and the "crescendo" ring (¢ page 50).
Select "0" to deactivate the base ringer.
u Ringtones:
You can set a ringer melody for external
calls (¢ page 50).
u Time control:
You can specify when the base should
not ring (e.g., during the night).
§Menu§ ¤ Settings ¤ Audio Settings
¤ Ringtones (Base) ¤ Ringer Volume /
Ringer Melody
/ Time Control
For more information on adjusting the set-
tings, see page 50.
Activating/deactivating
music on hold
§Menu§ ¤ Settings ¤ Telephony
¤ Music on hold
Press
§OK§ to activate or deactivate music on
hold (³= on).
Activating repeater support
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will ter-
minate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
§Menu§ ¤ Settings ¤ System
¤ Repeater Mode
Press
§OK§ to activate/deactivate repeater
mode (
³ = activated).
After activating or deactivating the
repeater, switch your handset off and
on again (¢ page 22).
Please note
u Eco Mode / Eco Mode+ (¢ page 45)
and repeater support cancel each
other out, i.e., you cannot use Eco
Mode and Eco Mode+ when using a
repeater.
u The default encrypted transmission
setting is deactivated when a
repeater is activated.