User manual

18
Taking the first steps
Gigaset C300-C300A / Swisscom EN / A31008-M2203-F151-1-2X19 / starting.fm / 17.06.2010
Version 4, 16.09.2005
Display in idle status
Once the phone is registered and the time set, the screen display is as follows
(example).
Screen display
u Reception between the base and the handset:
– Good to poor: ÐiÑÒ
–No reception: | flashes
Green: Eco Mode is activated (¢ page 45)
u Activating the answering machine:
Ã
: Your answering machine is set with
apre-recorded announcement.
u Battery charge status:
– U white: charged over 66 %
– V white: charged between 33 % and 66 %
– e white: charged between 10% and 33%
– = red: charged below 10%
– = e V Vwhite: battery charging
u INT 1
Internal name of the handset (¢ page 49)
If Eco Mode+ (¢ page 45) is activated, the ¼ icon is displayed in the top left.
Your phone is now ready for use!
The display shows Saved. You will hear
a confirmation tone and the handset
automatically reverts to idle status,
or returns to the "Settings" menu if
the setting was made via the menu.
μ
Saved
Please note
If your phone receives the date and time during calling line display (e.g., via your
network provider, a router or PABXs), you can specify whether this data should
be copied to your phone:
§Menu§ ¤ *#Q5#M3 ¤ Q or  or 2 ¤ §OK§
u Q: Never
u : Once, in case the date/time is not set on your phone
u 2: Always
Ð
Ã
U
10:53
23.04.10
INT 1
Redial Menu