User's Manual

21
ADVANCED SETTING
This chapter explains the advanced settings for administrator. Administrator is the one who owns
the administration password and has the full control to the WAPP camera. The administrator can
access all WAPP functions and settings, while general users can receive the surveillance images
for live view/screen capture/video recording and may not manage the camera settings.
Admin Password The security code required to enter Advanced Setting for system setting
management.
Device Security Code Setup/Change the password of the particular camera required for
remote access.
Cloud Setting Enter to (A) setup cloud storage service if you have not done so. The in-
app wizard will take you through step by step to complete the setup, (B)
Edit account password and (C) manage device.
WiFi Manage the Wi-Fi network setting (available for Android verison app).
Notify Enable Activate/Deactivate push notication function for the particular camera
and entire registered users.
Motion Detect Activate/Deactivate the motion detection function for the particular
camera.
LED Light Activate/Deactivate the white LED (for night view) function for the
particular camera.
SDCard Overwrite Activate/Deactivate the data storage overwrite function for the particular
camera.
Brightness Adjust the brightness level of the particular camera.
Power Saving Timer Adjust the power saving timer setting of the particular camera.
Device Information Access to view camera and app rmware versions.
Data Format Format the memory card inserted in the camera - all data will be erased.
Video Record Time Setup the length of video record when camera detects motion.
Record Mode Select capture snapshots or videos when camera detects motion.
Video Framerate Setup the number of frame per second for the video record.
Video Resolution Setup the video resolution for the video record.
Note:
It may take a few minutes for some routers to update the registered camera. When you
complete advanced settings and return to device list, please wait for a while allowing your
router to transfer the new setting(s) to the camera.