User's Manual

APP INTRODUCTION
Follow the steps below for Event Playback
(1) Tap the icon to access the event list section. (2) Select the time interval for the event list. (3) Select the le you want to playback. (4) If you want to store the les to the mobile device, tap to download the les (Best while under Wi-Fi enviornment due to larger high denation data size).
(1) (1)-1
(2) (3) (4)
3b.Wired Connection (1) Make sure your smartphone is connected your Wi-Fi router. (2) Connect the camera’s Ethernet cable to the Rj45 connect, and power on the camera with adapter. (3) Launch the APP, tap the “Search” to locate the camera. (4) Enter the default password 12345678 and save the settings. (5) Later, APP will request user to modify default password to private password .
Note: In soft AP mode, the RED LED long ashes once followed by 2 short ashes. In normal mode, the LED is ashing in RED.
4. Wi-Fi Setting (1) Tap then the advanced setting icon will appear on the screen.
(2) Enter the default password :12345678 (3) Select your Wi-Fi router, and enter its password.
(4) The Camera will oine for around 40 seconds to reboot for Wi connection. When camera connects to Wi-Fi router correctly, the RED LED will stay ON. (5) In the Wi-Fi setting on your smart device again, make sure the Wi-Fi router you are connecting to is the same as the camera. If not, manually assign to it.
Note: If you fail to add the camera for several times, press and hold the “Reset” button for 5 seconds to reset it.
Live-View
Camera List
Information
Refresh
Camera Setting
Add Camera
Live View
Snapshot Video Record Return Mute
Setup Camera Position
Arm/Disarm
Rj45 Connect
Power Adapter
Router
Advanced
Enter Admin Password (default 123456)
Choose the appropriate Wi-Fi router on your local network