User Manual

*Subject to change without notice Atomos Shogun – User Manual Edition 1: December 2014 18
10. Monitoring & Recording Audio Channels
Located on the bottom left corner of the home screen you will see the
Audio panel and quick headphone volume adjustment bar.
Tap the audio bars to bring up the audio panel.
From this panel you can manage up to 12 digital channels (via SDI input)
and 10 digital channels (via HDMI input) as well as 2 analogue audio
channels (via the XLR Mic/Line in).
Recorded digital audio inputs work in correspondence to the video
input source selected from the Input Menu, Analogue Line In is
available to both selectable inputs. An active video input is required
to record audio.
Each channel has a level meter assigned to Left & Right Channels; when
there is active audio feed you will see the level indicator moving.
You can choose to record from any or all of the digital (SDI or HDMI)
channels from the active source input as well as analogue inputs.
Underneath each pair of audio channels you can see the
record
button, when this is shown in red it is set to record, simply select the
channels you want to record.
The Analogue audio input level is located to the far right, tap
to record
this channel (XLR Line in Adapter Required)
Tap the headphone icon
next to the channel you wish to monitor from
the headphone output, you can adjust the analogue audio gain by
pressing the + and - buttons on Input Gain. There is also a slider to
controlthelineoutlevel.Pressanypointalongthelineorslideyournger
to the left or right to adjust.
It is not possible to vary the gain if the signal input is from the SDI or
HDMI connection because this is digital and is embedded in the
signal. You can usually adjust this from the camera, please see your
camera manual for operational details.
7. Using the Shogun cont.
Audio During Playback Mode
When you enter into Playback mode on the Shogun it will only output
channels 1/2 on the headphones, please bear this in mind when you
select the audio channels for recording.
AudioPanelConguration
Audio In
LineLevel(-10dBV)
Sets the analogue input channel to Line Level via the XLR to XLR
connector.
MicLevel(-40dBu)
Sets the analogue input channel to Mic Level via the XLR to XLR
connector.
Pro Level (+24 dBu)
Sets the analogue input channel to Pro Level Audio to via the
XLR to XLR connector.
Mic 48v
ON - Enables phantom power for mic’s connected via the XLR connection
Note: Audio In must be selected as Mic Level.
Input Gain
Allows incremental increase or decrease of analogue input gain up
to +/- 20dB.
Audio Out
Toggles the analogue gain on the Line Out/Head Phone connection.
Home Page Audio
Toggles the orientation of the audio bars displayed on the Shogun home
page for the input channel you are monitoring.
Horizontaldisplaysthe2channelsyouareactivelymonitoring.
Vertical displays 12 channels + 2 Analogue Channels.