User Manual

*Subject to change without notice Atomos Shogun Inferno – User Manual Edition 1: November 2016 14

6. Master Caddy II, Screw Mounts and Sun Hood cont.

Attaching the Sun Hood

ForHDR,theviewingexperiencecaneasilybeinuencedbythe

environmental conditions and the best experience for viewing HDR

requires that you minimise the ambient light between your eyes and the

screen to easily resolve the dynamic range of the scene. This allows

you easy to more easily adjust and as such quickly resolve the dynamic

range.

For this reason, the Inferno accessories include a sun hood which comes

atpackedin4sectionsfortransportationalongwith2x1/4”20mounts.

To assemble the sun hood please follow the following steps:

First thing to note is that the Sun hood consists of 3 parts as shown in

the image above - the base which connects to the Inferno unit, the long

shade part of the hood and the front face. Attach the base to the Inferno

in the orientation shown above ensuring that the soft side is sitting against

the glass face of the Inferno unit.

This is a snug t in order to minimize external light bleed.

Push the unit in, align the top and bottom screw mounting holes and

attach the retaining screws.

As the retaining screws provide anchor point for mounting make sure

they are rmly connected to provide a solid base.

With the Sun hood base in place, take the main section and pop this

out to form a rectangular tunnel. With the Atomos logo on the top facing

correctly toward you, slide this into the base.

Youcannowattachthefrontface,withthesideapswrappingaround

the Sun hood and retained by magnets.

When rst using the front face it may be required to bend the edge

aps a few times to frre up movement.

On the underside of the Sun hood construction is an elasticized access

point to the touch screen of the Inferno unit. If required the front section

of the Sun hood can be removed from the base for direct access to the

touchscreen.

Due to the quick release nature of the front section NO NOT HOLD or

pass the unit by the Sun hood alone as this could lead to accidentally

dropping and damaging the Inferno.

Attach base to Shogun Inferno

Snap the face to the hood

Slide the hood into the base