User Manual

*Subject to change without notice Atomos Ninja Inferno – User Manual Edition 1: May 2017 37
Record Run
WiththissettingyousetthestartingTimecodefortherstclip.The
following clips will start at the frame immediately after the out point of the
preceding clip. This will continue for all clips that follow. This is also
known as continuous Timecode.
Auto Restart
With this setting, the Timecode will be reset to the Timecode you have
denedwheneveryoupressrecord.Allyourclipswillstartwiththissame
Timecode.
To adjust the Timecode use the “+” and “-” above and below the
hour:minute:seconds sections
9. Timecode cont.