User Manual

*Subject to change without notice Atomos Ninja Inferno – User Manual Edition 1: May 2017 18
Lock the Display Screen
You can lock the display of the Ninja Inferno so that
no changes can be made by mistakenly touching
the screen, to lock the Ninja Inferno simply short
tap the power button. The screen lock function will
simultaneously lock or unlock both Channels of the Ninja
Inferno.
Short tap the power button again to unlock the unit.
The lock screen can be combined with the display off function so
that when lock is engaged the display is turned off. The Tally light on
the front of the unit will still display Rec (Red) or idle (green) status.
Locking of the display can be found in the Monitor Mode.
Timecode
TakesyoutothededicatedTimecodecongurationpage.
Refer to Page 36 of this manual for more information.
Ninja Inferno Info
Showsthesoftware(rmware)versionanduniquedevice
ID (DID) of your Ninja Inferno device. This will be required
to activate the Avid DNxHD / Avid DNxHR codec. You
can also check on the Atomos website to ensure you are
runningthelatestrmware:
http://www.atomos.com/support
Remember that pressing on the Back button will always take you
back to the previous menu.
7. Using the Ninja Inferno cont.
UNLOCKED
LOCKED
UNLOCKED
LOCKED
UNLOCKED
LOCKED