User Guide

36
uality interpolation, choose “Lowpass Filter”. 11 taps is the best
uality/CPU ratio.
available music is recorded at
a good idea to set your
utput to 44.1kHz.
his will prevent your soundcard
from
different sample rates and will
improv
you h
sample rates before, the 44.1kHz
setting should be default for your
sound
aster Tempo
The master tempo is the algorithm controls
without chang re”).
The default “Fast” algorithm takes only a small percentage of the CPU power, and produces
good results
can produce some choppiness. If your computer is fast enough, this can be corrected by using
the Advanced algorithm option. With the Advance option, raising the complexity or
spatialization of the algorithm can quickly overflow the systems CPU’s capabilities.
NOTE: Disab
48kHz <-> 44kHz
Describes how VirtualDJ will interpolate between the 48kHz and 44.1kHz sample rates.
Choosing “Basic Interpolation” will save some system resources and could improve
performance. For better q
q
NOTE: Most commercially
44.1kHz (including MP3s) so it is
soundcard’s o
T
having to interpolate to
e performance. Unless
ave worked with different
card)
M
PERFORMANCE SETTINGS
how VirtualDJ changes the pitch of the song
ing its tone (“KeyLock featu
at pitches in the range of -10% to +10%. For extreme pitching, the fast algorithm
le safe-mode for better performance with the Advance algorithm