User Guide

Quick Guide – Running for the first time …
Now lets setup VirtualDJ with one of the common
uses with a sound card—
Basic Internal Sound card,
Headphones with Internal Sound card,
External mixer with Multi-channel card,
or Timecode Control.
Setup for Basic Internal Soundcard use…
From installation you should not have to make any
adjustment. So to familiarize yourself with the in-
terface lets look at the Sound Setup in the Config.
A. Click on the Config button in the upper right
corner of the skin.
B. The first tab presented is the Soundcard tab.
This tab is used to make the selections for the
various configurations. After install, the de-
faults are
• Inputs—None
• Outputs—Single Output
• Soundcard—Simple with your sound card
listed in the drop-down to the right.
When making changes to the Sound Setup, use the
‘Apply’ button to assign the changes to be used.
Now you can use VirtualDJ to mix
your favorite songs and hear the
results from your computer’s
speakers.
Setup for Headphones with Internal Sound
card use…
* This setup uses your Internal Sound card with a
second soundcard for headphones. You can get a
second sound card with a single stereo output from
an local or on-line source.
A. Return to the Sound Setup tab by clicking on the
Config button in the upper right corner of the
skin.
B. Leave the Inputs option set to None.
C. Change the Outputs to Headphones, leaving the
drop-down to the right with the default.
D. Change the Soundcard option to 2 cards
After making the change to 2 Cards, you will notice
that the second drop-down to the right of the Out-
puts has changed to show -
Master : First card / Headphones : Second Card
And to the right of the Soundcard drop-down are
two drop-downs to choose the 2 cards to be used.
The top drop-down is the first card and the second
is the second card. Pick your cards accordingly.
If you want to use your Internal sound card for the
Master output of the music then pick the Internal
card for the first card. And the second card for use
as the Headphones. Just reverse the selection to
use the Internal card for your Headphones.
Make sure you ‘Apply’ the changes and select ‘OK’
to close the dialog.