User's Guide
33
VirtualDJ features an internal mixer section as part of the Mixer panel.
It can be used just like a regular DJ mixer.
The controls on the mixer include:
1. Panel selection buttons
2. Master and Headphone Cue volume knobs
3. Channel Gain
This knob sets the gain level for the
corresponding channel (deck). (Right clicking will
bring it to the value that matches the other deck
level. Double clicking brings it back to 0)
Key Adjust
Adjust the key of the playing track without
adjusting its pitch/tempo.
4. EQ
These knobs allow you to adjust the low, mid, and high frequencies of the audio playing
on the desired channel of the mixer. Each frequency range can also be cut by right-
clicking on the respective knob.
5. Channel Faders
These vertical faders allow you to adjust the audio signal of the desired channel.
6. PFL and VU Meters
Send the deck‘s pre-fader level of the audio for headphone monitoring to the cue
section. VU Meters show the current output of the respective deck.
7. Crossfader
The crossfader blends audio or video between the two decks. By sliding this fader from
channel to channel you can isolate the left and right deck or blend them together.
INTERNAL MIXER CONTROLS