Setup Guide
20
Timecode setup can be used with either the External or 3-Lines Mixer option. To setup VirtualDJ for
use with Timecode Vinyl or CDs, change the Inputs option to Timecode.
TIMECODE (SINGLE DECK) CONFIGURATION
For use with a single timecode source, chose the
Single Timecode option from the Input drop-down.
TIMECODE (DUAL DECK) CONFIGURATION
For use with 2 Timecode input sources, choose the
Timecodes option from the Input drop-down.
Just like in changing the outputs around if the
connections to the input sources are incorrectly
connected, you can choose to reverse the settings
from the input drop-down from Chan 1&2: Left Deck
/ Chan 3&4: Right Deck to Chan 1&2: Right Deck /
Chan 3&4: Left Deck.
** ADDITIONAL NOTES **
Setting up additional manufacture sound cards are done in the same manner as described above.
The limitations on choices will be based on features of the sound cards and the operating systems
supported.
Some important notes about using ASIO cards:
In order to use VirtualDJ‟s timecode capabilities, the sound card must be able to provide a
stereo signal on the appropriate input channels. Mono input of a timecode signal is not
supported.
During configuration of your sound setup, if the message “Not enough channels” is displayed
then you have selected a configuration that cannot be supported by your sound card. If you
find this to be incorrect, then consult the manual for your card to ensure that all settings are
properly made within the card‟s configuration before attempting to setup your card in VirtualDJ.
While configuring your ASIO card, if the message “Error in ASIO driver” is displayed then
VirtualDJ is unable to connect to the selected ASIO card. This can be a result of the card
incorrectly being connected to different USB port, card is not connected, or the cards
configuration has changed since last use.
TIMECODES