Setup Guide

12
VirtualDJ can also be configured to pass the line inputs of the sound card through software interface.
As depicted in the below images, the sound configuration being used is with the Inputs set to the
LINE-INs option.
Then by assigning the VDJScript action „linein‟ to an available deck, the audio sent in on the line input
will pass through VirtualDJ providing a rhythm wave display and dynamic BPM display on the deck.
The appropriate VDJScript syntax is “deck # linein #” – replacing the # symbols with the appropriate
deck and line numbers. The example below is using a 6 deck skin and assigning decks 5 and 6 to
line inputs 1 and 2 respectively.
BASIC (QUICK) CONFIGURATIONS – LINE INPUTS