Setup Guide

EXTERNAL MIXER – LEFT DECK AND RIGHT DECK ON SEPARATE OUTPUTS

With the Mac version, the same options as before; Inputs set to None, Outputs set to External Mixer,

and Sound card is set to 4-out Card. For the Outputs the assignment is Left Deck: Chan 1&2 and

Right Deck: Chan 3&4. Again with this configuration, connections of the 1&2 and 3&4 outputs of the

DeeJay Trim are connected to the appropriate Line level input channels on the mixer.

And as previous mentioned, if the

connections end up reversed; use

VirtualDJ to correct the assignment by

changing the output drop-down to Left

Deck: Chan 3&4 / Right Deck: 1&2.

3-CHANNEL EXTERNAL MIXER – LEFT AND RIGHT DECKS WITH SAMPLER

Again, similar to the standard 2 channel output, however; the 3-Lines Mixer option allows for the

output of the sampler and track preview deck to be sent on a separate channel.

By default the options are Chan 1&2: Left Deck / Chan 3&4: Right Deck / Chan 5&6:

Sampler/Preview. From the output drop-down (shown at the right) there are several different choices

to select, should the connections be incorrectly connected to the mixer.

BASIC (QUICK) CONFIGURATIONS – EXTERNAL MIXER

Hercules DeeJay Trim (back)