User's Guide

VirtualDJ 8 - User’s Guide
24
VOLUME - VU Meters
Use the Volume faders to control the volume of
each one of the available mixer’s channels.
Volume Faders - 4 Decks
The VU meters can display either the Output
level of the deck routed to the mixer or the
Output level of the mixer’s channel (after
Volume adjustments)
VU Meters - 4
Decks
Volume Faders & VU meters -
2 & 6 Decks
2 & 6 DECKS
Selection is made from the right-click menu on the VU meters.
4 DECKS
Selection is made from the Mixer Options button above the Audio
Crossfader
Notes.
- Volume faders should be left at maximum position (top) if External Mixer is selected in the Audio
Setup.
CROSSFADEREC
K
2 DECKS
Slide the crossfader to route the left or right deck to
the Master Output. If the crossfader is at the far left
side, only the left deck will be audible in the Master
Output.
Audio Crossfader - 2 Decks
If the crossfader is at the far right side, only the right deck will be audible in the Master
Output. At any other position, both decks will be audible.
4 DECKS
6 DECKS
Slide the crossfader to route the left or right
assigned deck of the mixer to the Master
Output.
Use the crossfader assign buttons to assign
a deck as left or right side of the crossfader.
If the crossfader is at the far left side, only the
left-assigned decks will be audible in the
Master Output.
Audio Crossfader - 4 Decks
Crossfader Assign buttons