User's Manual

The sound configuration window presents as follows:
Configuration window
On the right, choose the number and type of soundcard you have:
One soundcard: (default setting) sets the overall output of AtomixMP3 to your
default soundcard. Select on the right drop down menu among all soundcards
installed on your system.
3D soundcard: sets the two audio outputs of AtomixMP3 on the front and rear
output lines of your 3D soundcard. Select on the right drop down menu among all
soundcards installed on your system.
If your system support WDM drivers, uncheck the "Software 3D" emulation box.
Two soundcards: sets the two audio outputs of AtomixMP3 on each of your
soundcards. Select on the right drop down menu among all soundcards installed on
your system.
In the center, choose the output:
Single output: (default setting) sets the overall output of AtomixMP3 one
soundcard.
Headphones : allows the monitoring of the selected song on headphones
 With two soundcards or one 3D soundcard
 With a Y-splitter and one soundcard, each mono output corresponds to the
overall output and the monitoring line.
External Mix table: send the left and right desk to separate outputs (via two
soundcards, one 3D soundcard or a Y-splitter).
2. Skins
AtomixMP3 Skins
- Real eye candy -