User manual

11
change the voltage specification from 115v (US) to 230v (EU), or vice
versa, the fuse module must be rotated 180° and the fuse changed to the
correct specified value as marked above the AC inlet.
WARNING! Always disconnect the amplifier’s power cord from
the AC outlet before attempting to change the fuse. Refer to
the specification pages (pp. 13-17) to determine the correct fuse type
and rating. NEVER use a fuse with a higher rating as this could damage
the amp and present a serious safety hazard. If the fuse blows
repeatedly, the amp should be taken to an authorized service center.
OBTAINING SERVICE
Q: How do I go about getting my Reactor product repaired?
A: If your product should require service, you have two options. The
first is to take it to an authorized service center in your area. A list of
service centers is available on the ATOMIC AMPLIFIERS website
(www.atomicamps.com) or through our Customer Service Department at
[e-mail] or [phone]. Your second option is to send
the unit back to our factory service center for repair. You must first
contact us for a RETURN AUTHORIZATION NUMBER and shipping
instructions.
Q: Is there a charge for repairing my Reactor Series Product?
A: There may or may not be. If you have not done so already, read
the WARRANTY beginning on page 18 for information on coverage,
duration, and what is required of you the purchaser in order to obtain
Warranty Service.