User manual

9
ACTIVE CAB/WEDGE plus REACTOR PASSIVE CAB or WEDGE
It is possible to operate a second speaker cab with your powered cab or
wedge. Set up your active unit as shown in the MONO GUITAR RIG
example (p.8) and set the Speaker Switch to EXT. Then, connect the
Speaker Jack output to the Input of the passive cab/wedge with a high
quality speaker cable. This system may be duplicated on each channel to
create a massive stereo rig.
MB-50 with a REACTOR PASSIVE CAB or WEDGE
Using an MB-50 with a Reactor Passive Cab or Wedge creates a system
which is essentially identical to the corresponding ACTIVE model, with
the advantage of separate components bringing greater flexibility and
lighter individual piece weight. Simply connect the speaker output(s) of
the MB-50 to the input jack(s) of one or two passive cabs/wedges with a
high quality speaker cable. The MB-50 may also be used with any
appropriate speaker cabinet of your choice, allowing for the operation of
your favorite 1x12, 2x12, 4x12 or other configuration in an open-back or
closed-back designs.