User Manual

STEP 4:

As shown in FIGURE 4, attach each Rim P17 to Backboard P9 using Allen Head Bolts H6, Rim Support

Plate P18, Lock Washers H16 and Locknuts H3. Use Allen Wrench T1 and Wench T2 to tighten Nuts and

Bolts. Next, attach Rim Net P20 to each Rim P17.

For Customer Service Call 1-888-996-2729

PARTS REQUIRED:

8 pcs - H3 Lock Nut 1 pc - P9 Backboard 2 pcs - P20 Rim Net

8 pcs - H6 Allen Head Bolt 2 pcs - P17 Rim 1 pc - T1 Allen Wrench

8 pcs - H16 Lock Washer 2 pcs - P18 Rim Support Plate 1 pc - T2 1/4” Wrench

P17

H16

P18

NOTE:

Rim Support Plate P18

attaches to back side

of backboard.

P20

P17

Install Net

onto Rim

FIGURE 4

PARTS REQUIRED:

8 pcs - H8 Phillips Round Head Screw 4 pcs - H18 Lock Nut 1 pc - T1 Allen Wrench

4 pcs - H17 Phillips Round Head Bolt 1 pc - P19 Electronic Scoreboard 1 pc - T3 4mm Wrench

STEP 5:

Attach Electronic Scoreboard P19 onto

the back side of Backboard P9 using

Phillips Round Head Bolts H17 with Nuts

H18 as shown in FIGURE 5. Use the

wrench T3 to tighten Nuts.

Next, Install sensors as shown. Be sure

the color coded wires are placed as noted.

Use Screws H8 to attach each sensor.

White Wire

Black Wire

Grey Wire

Brown Wire

draobkcaB fo ediS kcaB

H17

H18

P19

FIGURE 5