User Manual

STEP 3:
Attach Left Stiffener Boards P22L and Right Stiffener Boards P22R to inside of Leg Connecting Panel P8
using Phillips Flat Head Screws H15. To finish securing the Left and Right Stiffener Boards, attach Metal
Connector H14 using Phillips Round Head Screw H12 on the bottom side of Stiffener Boards where they
join as shown in DETAIL A.
To complete step, attach Leg Connecting Panel P8 assemblies to Front Legs (P1L & P1R) and Back
Bottom Leg (P3L & P3R) assemblies from STEP 1 and STEP 2 using Allen Head Bolts H11 with Flat
Washers H7 as shown in FIGURE 3.
6
© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
8 pcs - H7 Flat Washer 16 pcs - H15 Phillips Flat Head Screw
4 pcs - H
9 Phillips Washer Round Head Screw 4 pcs - P8 Leg Connecting Panel
8 pcs - H11 Allen Head Bolt 2 pcs - P22L Left Stiffener Board
24 pcs - H12 Phillips Round Head Screw 2 pcs - P22R Right Stiffener Board
6 pcs - H14 Metal Connector 1 pc - T1 Allen Wrench
FIGURE 3
H9
H9
H15
H15
H9
H9
H11
H7
H11
H7
H12
H12
H14
H15
P22R
P22L
P22R
P8
P8
P8
P8
DETAIL A
P8
P22R
P22L
All Rights Reserved
P1L
P1R
P3L
P3R
P22L