User Manual

STEP 9:

With the help of another adult, attach upper back

board assembly from previous STEP 6 to lower

frame assembly.

First, thread two Bolts H1 with Flat Washer H4 into

each Side Back Top Leg P4 and two Bolts H1 with

Flat Washer H4 into each Left and Right Back Top

Leg P5L & P5R to secure the upper unit.

Next, assemble each Back Side Ramp Support

Tube P10 to Front Side Ramp Support Tube P11

using Phillips Round Head Bolts H10 as shown in

FIGURE 9.

Attach assembled Support Tubes to both sides of

the frame on the top hole as shown using Bolts H2

with Flat Washers H7 and Nut H3.

Attach Support Tube at the front of the unit in top

hole as shown in FIGURE 9.

For Customer Service Call 1-888-996-2729

PARTS REQUIRED:

8 pcs - H1 Allen Head Bolt 8 pcs - H7 Flat Washer 2 pcs - P11 Front Side Ramp

4 pcs - H2 Allen Head Bolt 8 pcs - H10 Phillips Round Head Bolt Support Tube

4 pcs - H3 Lock Nut 2 pcs - P10 Back Side Ramp 1 pc - T1 Allen Wrench

8 pcs - H4 Flat Washer Support Tube 1 pc - T2 1/4” Wrench

FIGURE 9

P5L

P5R

P1L

P1R

NOTE:

Top Hole

P11

P10

H10

NOTE:

P11 Tube inserts into P10 Tube.