User Manual

STEP 8:

To attach the Ramp Net P21, begin at

top of board assembly and secure both

sides of Ramp Net P21 using Allen

Head Bolt H6 with Flat Washer H7

as shown in DETAIL B.

Next, slide Steel Rod P13 through

sleeve at top of Ramp Net P21 and

secure to Side Back Top Leg P4 using

Allen Head Bolt H11 with Flat

Washer H7.

Be sure the bottom loop of Net

Support Pole P15 is between

Rod P13 and Side Board P4

as shown in DETAIL C.

To attach Steel Rod P14 to Side

Back Top Leg P4, place Allen

Head Bolt H5 and Flat Washer

H7 through the Side Back Top

Leg P4, and thread into the

P14 Rod end. Ramp Net must

be installed behind Steel Rod

P14 as shown.

Next, slide Steel Rod P12 into

sleeve at front of Ramp Net

P21.

For Customer Service Call 1-888-996-2729

PARTS REQUIRED:

2 pcs - H5 Allen Head Bolt 1 pc - P12 45” Front Ramp Support Round Tube

2 pcs - H6 Allen Head Bolt 1 pc - P13 45.5” Back Ramp Support Round Tube

6 pcs - H7 Flat Washer 1 pc - P14 45.875” Back Ramp Support Round Tube

2 pcs - H11 Allen Head Bolt 1 pc - T1 Allen Wrench

FIGURE 8

DETAIL B

H11

P13

P15

DETAIL C

H11

P14

P13

P12