Instruction Manual

©
2012 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
STEP 2:
Attach P4 End Leg Panels between two legs of P2 Right Legs and P3 Left Legs using H3 Hex Bolts with H4 Flat
Washers and H5 Barrel Nuts as shown in FIGURE 2. Use T1 Wrench to tighten all bolts.
Important Note: Tighten, but do not over tighten H3 Bolts.
PARTS REQUIRED:
8 pcs - H3 Hex Bolt 8 pcs - H5 Barrel Nut 2 pcs - P6 Right Cover Leg Panel 1 pc - T1 Wrench
8 pcs - H4 Flat Washer 2 pcs - P4 End Leg Panel 2 pcs - P7 Left Cover Leg Panel
P3
P2
P2
P3
FIGURE 2
H5
H4
H3
H5
H4
H3
H3
H4
H4
P4
P4
P3
P2
STEP 3:
Carefully bow and slide P6 Right Leg Panel and P7 Left Leg Panel into the grooves of each leg assembly as
shown in FIGURE 3.
P7
P6
P7
P3
White Laminate
on this side
FIGURE 3
White Laminate
on this side
White Laminate
on this side
White Laminate
on this side
P6
P2
H4
H3
H4
H3
H4
NOTE: P6 and P7 Leg
Panel must be flush
with bottom of Legs.
Flush
Flush
Flush