User Manual

STEP 1.

Move the table to room of choice before starting installation. Leave the Main Cabinet P1 face down in

the carton to protect the table.

Attach each Leg P2 as shown in FIGURE 1. Place Washer H2 on Bolt H1, insert bolts through support

in Main Cabinet P1 and into threaded inserts in Leg P2.

Tighten all hardware securely using the Wrench T1 provided.

Next, thread Leg Levelers P3 into the bottom of each leg as shown.

FIGURE 1

PARTS REQUIRED:

24 pcs - H1 Hex Bolt 4 pcs - P2 Metal Leg

24 pcs - H2 Flat Washer 4 pcs - P3 Leg Leveler

1 pc - P1 Main Cabinet 1 pc - T1 Wrench