Owners manual

STEP 1.

Move the table to room of choice before starting installation. Leave the Main Cabinet P1 face down in

the carton to protect the table.

Attach each Leg P2 as shown in FIGURE 1. Place Washer H2 on Bolt H1, insert bolts through support

in Main Cabinet P1 and Leg P2. Next, place Washer H2 and Lock Washer H4 on the Bolt and secure

using Nut H3. Tighten all hardware securely using the Wrench T1 provided and an adjustable wrench.

Repeat as shown with each remaining leg.

Next, thread Leg Levelers P3 into the bottom of each leg as shown.

FIGURE 1

PARTS REQUIRED:

12 pcs - H1 Hex Bolt 1 pc - P1 Main Cabinet

24 pcs - H2 Flat Washer 4 pcs - P2 Leg

12 pcs - H3 Nut 4 pcs - P3 Leg Leveler

12 pcs - H4 Lock Washer 1 pc - T1 Wrench