Specifications

Acetylene Regulator
PerkinElmer Factory Tested and Approved
PerkinElmer offers a full range
of filters and regulators
for your laboratory
Hose Assemblies
50
Nitrous Oxide Regulator
For use in AA labs with gas cylinders with a
CGA 326 connection. Provides pressure
control from 350–520 kPA (50 – 75 psig) and
contains an integral thermostatted heater to
prevent freezing of the regulator diaphragm.
Part No.
03030204
Argon/Nitrogen Regulator
For AA and ICP, this regulator can be used with argon or nitrogen and
has a CGA 580 fitting. A color-coded hose with
1
⁄4 inch SWAGELOK
®
fittings is also included.
Description Part No.
Max inlet pressure: 3,000 psig 03030284
Matheson Flashback Arrestor
Because acetylene is an extremely unstable gas, users can experience
flashbacks at the instrument burner head. The flash arrestor prevents
these potentially dangerous flashbacks from reaching the regulator
or cylinder.
Description Part No.
Acetylene max operating pressure: 15 psig N9300068
Air Regulator
For AA labs. Regulator to cylinder CGA no.
590. Includes hose assembly.
Description Part No.
Max inlet pressure: 3,000 psig 03030264
Acetylene Regulator
For AA labs, this regulator includes an adapter so that the pressure
regulator can be connected to cylinders requiring either CGA 300 or
CGA 510 fittings and a connector for attaching the fuel hose assembly
supplied with the instrument. Includes hose assembly.
Description Part No.
Max inlet pressure: 400 psig 03030106
Hose assemblies for connecting
fuel, air and nitrous oxide from
supply to instrument.
Description Part No.
Acetylene, red neoprene, 3.7 m (12 ft) 00570559
Air/Argon, black, 3.7 m (12 ft) 00570567
Nitrous Oxide, blue, 3.7 m (12 ft) 00470258
See page 2 for ordering information and a complete listing of PerkinElmer offices .