Specifications

Unique Detector and Ion Optic design
mass spectrometer hardware and supplies
36
Vacuum Pump Oil
Ion Lens
ShadowStop
Vacuum Pump Supplies
Series II
ShadowStop
Series II
Ion Lens
Ion Optics
PerkinElmer offers the industry’s only single-ion lens with the exclusive
SwiftMount
™
II cassette lens mount. The plug and play design makes
changing the ion lens faster and simpler than ever before. No tools are
required as the design incorporates a clean capture-and-release concept.
Fomblin Vacuum Pump Fluid
Description Size Part No.
Y14/6 1 kg N8122265
High Vacuum Silicon Grease
For lubrication of ELAN 9000/6X00/5000/DRCs vacuum system O-Rings.
Part No.
09905147
For use with roughing pumps. One gallon (3.8 liters).
Pump Model Part No.
Leybold N8122004
Varian N8122308
Description ICP-MS Model Part No.
Cassette Lens ELAN 9000/DRCs W1013361
ShadowStop manufactured after April, 2005
Series II ELAN 9000/6X00/DRCs WE029011
ShadowStop manufactured between January, 1998 and April, 2005
Description ICP-MS Model Part No.
Cassette Ion Lens ELANs manufactured W1017871
Upgrade Kit before April, 2005
Series II Ion Lens ELAN 9000/6X00/DRCs WE018034
manufactured after January, 1998
Ion Lens ELAN 6000s manufactured WE014777
before January, 1998
Series II Lens ELAN 9000/6X00/DRCs W1010620
Removal Tool manufactured between January,1998 and April, 2005
Detector
SimulScan Dual-Stage Detector
The original dual-stage detector is an integral part of the ELAN
SimulScan
™
system. This electron multiplier measures both high- and
low-level analytes simultaneously. This conserves valuable or limited
samples, eliminates the need to perform time-consuming sample
dilutions and allows you to quickly characterize unknown samples.
This Detector is designed for use with the ELAN 9000/6X00/DRCs.
ICP-MS Model Part No.
ELAN 9000/6X00/DRCs* manufactured prior to April, 2005 N8125001
SimulScan Dual-Stage Detector
The improved Dual-Stage Detector is designed for better stability
and longer lifetime than its predecessor. ELAN instruments produced
after April, 2005 have the proper electronics to accept this detector
without modification. ELAN instruments manufactured before April,
2005 will require a one-time upgrade to the Detector Electronics
(W1013195). Using this detector in an instrument without the upgraded
electronics will result in higher noise levels and shorter lifetime.
ICP-MS Model Part No.
ELAN 9000/6X00/DRCs* N8125050
Detector Electronics Upgrade Kit
Boosts detector life at least 20%.
ICP-MS Model Part No.
ELAN 9000/6X00/DRCs* manufactured prior to April, 2005 W1013195
*Service installation is required, but not included.
See page 2 for ordering information and a complete listing of PerkinElmer offices .