Specifications

34
Quartz Injectors
Full selection of Alumina, Quartz
and Sapphire Injectors
and Support Adapters
Injector Support Adapter O-Rings
Injector Support Adapters
Quartz Ball Joint Injectors
injectors and adapters
Quartz Injectors
Quartz Injectors are compatible with twist type and cassette torch mounts.
The ELAN DRC II uses a specially designed all-quartz sample
introduction system to minimize background contamination levels.
The standard 2.0 mm i.d. quartz injector is held by a specially designed
pass-through, injector support assembly to minimize contact with
materials that could cause sample contamination, a must for
determinations made at the parts-per-trillion level.
Alumina Injectors
Alumina injectors are compatible with twist type and cassette torch
mounts. They are vacuum baked to reduce contamination.
■
2.0 mm i.d. for use with HF-resistant (Ryton
®
) sample introduction
system. Standard injector for aqueous solutions and less volatile
organic solvents
■
1.5 mm i.d. for reduced sample loading with HF-resistant (Ryton
®
)
sample introduction system
■
0.85 mm i.d. for use with volatile organic solutions on the
HF-resistant (Ryton
®
) sample introduction system
Sapphire Injectors
Sapphire Injector Tube, 2.0 mm i.d.
Demountable injector for use with the HF-resistant (Ryton
®
) sample
introduction system. Not for use with PFA sample introduction system.
Description Part No.
ELAN DRC-e/9000/6X00/5000 N0695495
PFA Injector Assemblies
PFA/Quartz Torch Injector Assembly
Description Dimension Part No.
PFA/Quartz Twist Type 1.5 mm i.d. N8122394
PFA/Quartz Cassette 1.5 mm i.d. N8122413
PFA/Sapphire Torch Injector Assembly
Description Dimension Part No.
PFA/Sapphire Twist Type 1.8 mm i.d. N8122358
PFA/Sapphire Cassette 1.8 mm i.d. N8122411
PFA/Platinum Torch Injector Assembly
Description Dimension Part No.
PFA/Platinum Twist Type 2.0 mm i.d. N8122359
PFA/Platinum Cassette 2.0 mm i.d. N8122412
Position Torch Type Part No.
External Twist/Cassette 09210011
External (large) Cassette W1013545
Internal Twist/Cassette 09210012
ICP-MS Model Part No.
ELAN DRC/DRC
plus
/DRC II
Ball Joint Twist Type Torch Injector Support Adapter WE023951
ELAN DRC II
Ball Joint Cassette Torch Injector Support Adapter W1012406
ELAN 9000/6X00/5000/DRC-e
Twist Type Torch Injector Support Adapter N8122007
Twist Type Torch Injector Support Adapter N8120116
(Assembled with O-Rings)
ELAN 9000/6X00/5000/DRCs
Injector Support Adapter O-Ring Kit N8120100
For ELAN DRC/DRC
plus
/DRC II. For use with Pass-Through Ball Joint Injector Support
Adapters (WE023951 or W1012406).
Description Recommended Use Part No.
0.85 mm i.d.* Volatile Organics WE027030
1.5 mm i.d.* Organics WE027005
2.0 mm i.d. General Purpose WE023948
*For reduced sample loading.
For the ELAN DRC-e/9000/6X00/5000 when using the HF-Resistant Sample
Introduction System (WE024782).
Description Recommended Use Part No.
1.2 mm i.d. Organic Solvents N0681631
1.6 mm i.d. Organic Solvents 00473292
2.0 mm i.d. Clinical Samples N8125029
Alumina Injectors for ELAN DRC-e/9000/6X00/5000/500
Dimension Part No.
2.0 mm i.d. N8126041
1.5 mm i.d. N8126040
0.85 mm i.d. N8126039
See page 2 for ordering information and a complete listing of PerkinElmer offices .