Specifications

32
PerkinElmer spray
chambers
provide
maximum
sensitivity
and efficiency
Superior Quality Spray Chambers for a
Baffled Cyclonic Spray Chambers
The spray chamber is an integral part of the sample introduction system
responsible for filtering the sample mist to permit the appropriate droplet
size distribution to reach the plasma. The baffled cyclonic spray chamber
features a central transfer tube which acts as a secondary particle
separator helping separate larger aerosol particles from the sample.
This reduces solvent load in the plasma without compromising detection
limits. The distance between the bottom of the baffle and the chamber
wall is carefully controlled so that droplets cannot form on the bottom of
the baffle. The advantage is smooth draining and improved precision.
Baffled Quartz
Cyclonic Spray Chamber
Baffled Quartz Spray Chamber
(Teflon
®
O-Ring type) with ball joint.
ICP-MS Model Part No.
ELAN DRC/DRCplus/DRC II WE025221
O-Ring for Baffled Quartz
Cyclonic Spray Chamber
Teflon
®
coated Viton. Standard on Baffled Quartz Cyclonic Spray
Chamber (WE025221).
Part No.
09210011
Water-Cooled
Baffled Glass
Cyclonic Spray
Chambers
The water-cooled design
permits the introduction of
coolant for temperature
control. Thermostatting to
constant temperature helps ensure highly reproducible results and
long-term stability. Can also be cooled to suppress volatilization,
allowing the direct aspiration of highly volatile solvents such as naphtha
and petrol/gasoline. Glass with baffle and oxygen port. Recommended
for light organic solvents and chromatography use. Includes Auxiliary
Port and Teflon Seals, 50 ml cyclonic, Borosilicate glass.
ICP-MS Model Part No.
ELAN DRC-e/9000/6X00/5000 N8120180
ELAN DRC/DRC
plus
/DRC II N8120181
Water-Cooled O-Ring Free Baffled
Glass Cyclonic Spray Chamber
The o-ring free design eliminates the o-ring seal between the nebulizer
and the spray chamber.
ICP-MS Model Part No.
ELAN DRC-e/9000/6X00/5000 N0775353
Baffled Quartz Cyclonic Spray Chamber
7 mm baffle, aux. gas port, drain line included and connects directly to
ESI injectors. An adapter is needed to connect to other injectors.
Description Part No.
With Auxillary Gas Port N0777034
Without Auxillary Gas Port N0777035
See page 2 for ordering information and a complete listing of PerkinElmer offices .