Specifications

30
MicroMist Nebulizers
The MicroMist micro-uptake
glass concentric nebulizer offers
high performance for limited
sample volumes. MicroMists
with sample uptakes 0.2 – 0.4
mL/min are fitted with a UniFit
connector with 1.3 o.d. x 0.50
mm i.d. x 700 mm long sample
tubing. MicroMists with sample
uptakes 0.05 – 0.1 mL/min are
fitted with a UniFit connector with 1.3 o.d. x 0.25 mm i.d. x 700 mm
long sample tubing. All MicroMist nebulizers offered by PerkinElmer are
supplied with the EzyLok argon connector.
MicroMist Nebulizers
High-Performance Nebulizers with Excellent
PerkinElmer nebulizers offer
superb sample introduction
for a
wide variety of applications
AR Flow Rate Uptake Rate Part No.
1.0 L/min 0.4 mL/min N0775341
1.0 L/min 0.2 mL/min N0775342
1.0 L/min 0.1 mL/min N0775343
1.0 L/min 0.05 mL/min N0775344
SeaSpray Nebulizers
The SeaSpray Concentric Nebulizer is ideal for samples with high
dissolved solids and offers outstanding nebulization efficiency for trace
level analysis. It offers freedom from clogging while nebulizing solutions
near the limit of solubility of most mineral salts, and conferring significant
sensitivity gains. All SeaSpray Nebulizers are supplied with the EzyLok
Argon connector.
AR Flow Rate Uptake Rate Part No.
1.0 L/min 2 mL/min N0775340
1.0 L/min 1 mL/min N0774069
1.0 L/min 0.4mL/min N0777484
OpalMist Nebulizers
The OpalMist is ideal for the geochemistry & semiconductor industry.
The OpalMist PFA concentric nebulizer is for high precision analyses
involving analyses requiring high chemical resistancy to HF, alkalis and
organics. It also provides excellent results for trace analyses.
AR Flow Rate Uptake Rate Part No.
1.0 L/min 0.4 mL/min N0777485
1.0 L/min 0.1 mL/min N0777486
Conikal Nebulizer
Includes UniFit Connector with 0.75 mm i.d. x 1.3 mm o.d. x 700 mm
tubing and EzyLok Connector Kit.
AR Flow Rate Uptake Rate Part No.
1.0 L/min 3 mL/min N0773195
See page 2 for ordering information and a complete listing of PerkinElmer offices .
Meinhard Nebulizers
The MEINHARD
®
Concentric Nebulizer reflects exacting standards in
design and manufacturing. Its advantages include simplicity of design
and operation, reproducible and self-aligning aerosol, and close
fabrication control. They provide excellent sensitivity and precision for
aqueous solutions and samples with few dissolved solids (less than
1%). MEINHARD
®
Nebulizers are self-aspirating. They are not to be
used with solutions containing hydrofluoric acid. PerkinElmer offers
three types for ICP-MS: MEINHARD
®
C3, K and A3. All MEINHARD
®
Nebulizers require an end cap (N0680504) for use with Ryton
®
Scott
Spray Chambers. The Type A3 is an all-quartz concentric nebulizer, and
ships standard on the ELAN DRC/DRC
plus
/DRC II.
Model Material AR Flow Rate Uptake Rate Part No.
Type C3 Glass 1.0 L/min 3 mL/min N8102011
Type K Glass 1.0 L/min 3 mL/min N0681574
Type A3 Quartz 1.0 L/min 3 mL/min WE024371
Description Part No.
Nebulizer Clip for Meinhard Nebulizers N0777460
4 mm Liquid-End Connector Kit N0777414
Liquid Connector
Low dead volume PEEK connector for use with MEINHARD
®
Concentric
Nebulizers. Requires 0.062 in (1.59 mm) o.d. tubing (WE024375).
Standard on ELAN DRCs. Not required for PFA Teflon
®
Nebulizers.
Part No.
WE024372
Ryton
®
End Cap
for Concentric Nebulizers
Ryton
®
end cap to fit any concentric nebulizer onto a
Ryton
®
Scott Spray Chamber.
Part No.
N0680504