Specifications
MicroMist Nebulizers
SeaSpray Nebulizers
22
Concentric Nebulizers offer
high-quality sample introduction
for a
wide variety of applications
nebulizers
PolyPro ST Nebulizer with
Detachable Capillary
This nebulizer is Polypropylene construction and Hydrofluoric acid
resistant. 0 – 3 ml/min sample flow rate with peristaltic pumping.
Description Part No.
PolyPro ST Nebulizer with Detachable Capillary N0777219
PFA-ST Nebulizer with Detachable Capillary N0777049
The MicroMist micro-uptake glass concentric nebulizer offers high performance
for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.6 mL/min
are fitted with a UniFit connector with 1.3 mm o.d. x 0.50 mm i.d. x 700 mm long
sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are
fitted a UniFit connector with 1.3 mm o.d. x 0.25 mm i.d. x 700 mm long sample
tubing. All MicroMist nebulizers offered by PerkinElmer are supplied with the
EzyLok argon connector.
For Optima 2X00/3X00 XL/3X00 DV/3000 SCX/4X00/5X00/7X00*
Ar Flow Rate Uptake Rate Part No.
0.7 L/min 0.05 mL/min N0775349
0.7 L/min 0.1 mL/min N0775348
0.7 L/min 0.2 mL/min N0775347
0.7 L/min 0.6 mL/min N0775346
For Optima 3000/3000 SCR/3X00 RL*
Ar Flow Rate Uptake Rate Part No.
1.0 L/min 0.05 mL/min N0775344
1.0 L/min 0.1 mL/min N0775343
1.0 L/min 0.2 mL/min N0775342
1.0 L/min 0.4 mL/min N0775341
*Requires Quick Disconnect part no. N0770336.
The SeaSpray concentric nebulizer is ideal for samples with high dissolved solids
and offers outstanding nebulization efficiency for trace level analyses. It offers
freedom from clogging while nebulizing solutions to the limit of solubility of most
mineral salts and conferring significant sensitivity gains.
For Optima 2X00/3X00 XL/3X00 DV/3000 SCX/4X00/5X00/7X00
Ar Flow Rate Uptake Rate Part No.
0.7 L/min 2 mL/min N0775345
For Optima 3000/3000 SCR/3X00 RL
Ar Flow Rate Uptake Rate Part No.
1.0 L/min 2 mL/min N0775340
MEINHARD
®
Nebulizers
The MEINHARD
®
concentric glass nebulizer reflects exacting standards
in design and manufacturing. Its advantages include simplicity of
design and operation, reproducible and self-aligning aerosol and close
fabrication control. They provide excellent sensitivity and precision for
aqueous solutions and samples with few dissolved solids (less than
1%). MEINHARD
®
Nebulizers are self-aspirating and must not be used
with solutions containing hydrofluoric acid. PerkinElmer offers three
types for ICP-OES, MEINHARD
®
A, C and K. All require an end cap for
use with Ryton
®
Scott spray chambers.
MEINHARD
®
Model Application Part No.
Type A General purpose 00472020
Type C High dissolved solids 00472022
Type K Reduced flow and organics N0681574
Description Part No.
Liquid-End Connector Kit, 4 mm N0777414
Nebulizer Clip for Meinhard Nebulizers N0777460
End Cap for Concentric Glass Nebulizers
ICP Model Part No.
Optima 2X00/3X00/4X00/5X00/7X00 N0680504
PEEK Mira Mist
®
Nebulizer
The Mira Mist
®
fits regular spray chambers as a direct replacement
for glass concentric nebulizers. Its features include standard pressure
(45 psi), low sample flow and enhanced parallel path design.
Description Uptake Rate Part No.
PEEK Mira Mist 0.2 to 2.5 mL/min N0775330
Teflon Mira Mist 0.2 to 2.5 mL/min N0777031
For samples with high HF, Sulphuric, and
some other solvents that attack Peek.
Ari Mist (low flow) 0.050 to 1.0 mL/min N0777032
T2100 0.5 to 3.0 mL/min N0777033
For high levels of undissolved solids such
as oil samples, geologic samples, and slurries.
See
page 2
for ordering information and a complete listing of PerkinElmer offices
.
New! Concentric Nebulizers
For Optima 2X00/3X00/4X00/5X00/7X00
Type Uptake Rate Part No.
Conikal Nebulizer 2 mL/min N0777487
Slurry Nebulizer 4 mL/min N0777488
VeeSpray Ceramic Nebulizer 3 mL/min N0777489
PolyCon Nebulizer 2 mL/min N0777490
PEEK Mira Mist
®
Nebulizer
Please see website for more details.