Owner Manual

12
For Customer Service Call 1-888-996-2729
© 2016 Escalade Sports
All RIghts Reserved.
STEP 8
PARTS REQUIRED:
16 pcs - H1 M6 x 20 mm Allen Head Bolt 2 pcs - P18 Rim
24 pcs - H7 Flat Washer 2 pcs - P20 Rim Support Plate
8 pcs - H8 Plastic Flat Washer 2 pcs - P23 Mechanical Scoring Arm
16 pcs - H9 Lock Nut 1 pc - T1 Allen Wrench
1 pc - P17 Backboard 1 pc - T2 Wrench
Attach P18 Rims and P20 Rim Support
Plates to the P17 Backboard using
H1 Bolts, H7 Washers and H9 Lock
Nuts as shown in FIGURE 8.
Attach P23 Mechanical Scoring Arms
to
P17 Backboard using H1 Bolts,
H7 Washers, H8 Plastic Washers
and H9 Lock Nuts as shown
in FIGURE 8.
Use T1 Allen Wrench and
T2 Wrench to tighten H1 Bolts
& H9 Nuts.
NOTE:
P23 Mechanical Scoring Arm
sensor plug must pass through
P17 Backboard before attaching
the scoring arm.
NOTE: Use H8 Plastic
Flat Washers for P23
Scoring arm only.
NOTE: Use P20 Rim Support
Plate for P18 Rim only.
EVA Foam must
face Backboard
FIGURE 8
H9
H7
Plastic Flat
washers H8
P20
H1
P18
P23
P17
STEP 9
FIGURE 9
PARTS REQUIRED:
4 pcs - H11 3.5 x 8 mm Phillips Round Head Bolt
2 pcs - P19 Rim Net
1 pc - P21 Electronic Scorer Display
1 pc - P22 Electronic Scorer Face Plate
Attach P21 Electronic Scorer Display and
P22 Electronic Scorer Face Plate to P17
Backboard using
DO NOT Strip out H11 Screws.
H11 Bolts as shown
in FIGURE 9.
Loop the P19 Rim Net through the ram horns
on the P18 Rims as shown in FIGURE 9.
H11
P21
P22
P19
P19
H7
P17
Note: This is a special rim & net
Net does have a
top and bottom,
The long loops go
to the top
designed to avoid entanglement
with the mechanical scoring arm.