Installation & Assembly

©
2012 Escalade Sports
For Customer Service Call 1-888-996-2729
All Rights Reserved.
STEP 7:
Slide P22 3 Player Rods, P23 5 Player Rod and
P21 2 Player Rod through P17 Rod Bushings of
one P1 Side Apron as shown in FIGURE 7.
IMPORTANT NOTE: Please note the location
of the hole that is near one end of each rod.
This is the handle end of the rod.
Place one P14 Rod Bumper on each rod as
shown in FIGURE 7.
Place P19 Red Shirt / Black Shorts Players on
each rod as shown in FIGURE 7.
IMPORTANT NOTE: The goalie should be
at your left and your team (player face)
facing to the right.
Looking ahead to Page 10 FIGURE 10 - will
help you with correct player and rod handle
assembly onto rods.
Place one P14 Rod Bumper on each rod as
shown in FIGURE 7.
PARTS REQUIRED:
4 pcs - H8 Phillips Round Head Bolt 1 pc - P21 2 Player Rod 8 pcs - P14 Rod Bumper
13 pcs - H10 Phillips Round Head Bolt 2 pcs - P22 3 Player Rod 4 pcs - P15 Rod End Cup
13 pcs - H11 Lock Nut 1 pc - P23 5 Player Rod 4 pcs - P16 Rod Handle
13 pcs - P19 Red Shirt / Black Shorts Player
FIGURE 7
9
STEP 8:
Align P19 Red Shirt / Black Shorts Player to each
player hole and attach using H10 Bolts with H11
Lock Nut as shown in FIGURE 8 and DETAIL A.
Attach P15 Rod End Caps to the rods as shown in
FIGURE 8.
Slide P16 Rod Handle onto each rod end with the
small hole as shown in FIGURE 8.
Attach P16 Rod Handle using H8 Bolts as shown
in FIGURE 8.
Hole / Handle End
P17 Rod
Bushing
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
LEFT
RIGHT
P1
Side Apron
P22
3 Player Rod
P22
3 Player Rod
P23
5 Player Rod
P21
2 Player Rod
= P14 Rod Bumper
= P19 Red Shirt /
Black Shorts Player
P14
P19
P14
P15
Rod End Cap
P15
Rod End Cap
P16
Rod Handle
P16
Rod Handle
DETAIL A
Soccerman
facing up
Rod
H10
H11
P19
FIGURE 8
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
H8
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P16 Handles with thumb slot
facing up.
NOTE:
Small Hole