Installation & Assembly

©
2012 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
PARTS REQUIRED:
12 pcs - H4 Phillips Washer Head Screw 3 pcs - P5 Playfield
6 pcs - H5 Phillips Flat Head Screw Support Brace
STEP 3:
Center and attach P3 Playfield in the cabinet using pre-drilled pilot holes with H4 Screws as shown in FIGURE 3.
Place each P5 Playfield Support Brace and attach using pre-drilled pilot holes with H5 Screws as shown in
FIGURE 3.
Important Note: Please be sure to install H4 screws and H5 screws
exactly as per FIGURE 3. Screws must be screwed straight down.
FIGURE 3
H5
H4
P5
P5
P5
PARTS REQUIRED:
16 pcs - H2 Allen Head Bolt 4 pcs - P4 Leg
16 pcs - H3 Flat Washer 4 pcs - P10 Leg Leveler
16 pcs - H12 Lock Washer 1 pc - T1 Allen Wrench
STEP 4:
Attach P4 Legs using H2 Allen Head
Bolts with H12 Lock Washers and H3 Flat
Washers as shown in FIGURE 4 & DETAIL B.
Use T1 Allen Wrench to tighten H1 Bolts.
Thread P10 Leg Levelers onto each P4 Leg
as shown in FIGURE 4.
FIGURE 4
P10
P10
P10
P10
P4
P4
P4
P4
DETAIL B
H2
H12
IMPORTANT NOTE: Center P3
Playfield before installing H4 and
H5 Screws.
If P3 playfield is not centered,
you may need to loosen H1
Bolts ( in Step 2 ) to correctly
center the P3 Playfield
- Retighten H1 Bolts once P3
Playfield is correctly centered.
H3